Glossary Of Terms - Philips 64331 Operation Manual

200 Plus Series Console

2. Glossary of Terms

This section covers some of the common terms used throughout this manual.
Channel Expansion Keys: Key 1-48 & Key 49-96 (Key 12-24 & Key 25- 48)
Used to Page up/down for faders allowing the 24/48 console to control up to a maximum of 96 fader channels
(maximum of 48 faders on the 12/24). Pressing Key 1-48 will set the faders to control channels 1-48, Pressing Key
49-96 will set the faders to control channels 49-96.
Key 1, Key 2, Key 3, ...Key48
Under each channel fader is a flash button (bump button) for that channel.
SingleScene Button
Used to enter into Single Scene Mode which allows access to all the fader channels.
TwoScene
Used to enter into TwoScene Mode. Allows the console to be run in a standard two scene preset mode. This limits
access to 24 channels. (12 channels on the 12/24 version).
SubMaster
Used to enter into SubMaster Mode. Allows users to record generic channels into a memory for manual playback.
ML (Moving Light)
Used to enter into ML Mode. Allows for the programming of moving lights into Playback faders or into FX stacks.
LED Mode
Used to enter into LED Mode. Allows for the programming of LEDs into Playback faders or into FX stacks.
PlayBack
Used to enter into PlayBack Mode. Allows for access to submaster playback of generic lights and the manual
playback of ML and LED memories.
NEXT
Used to process CrossFade function in SingleScene Mode and submaster mode.
A Store / B Store
Used to store temporary memories when operating the console manually in Single Preset mode.
Record
Used to record submasters, playbacks and FX stacks.
EXT 1 and EXT 2
Allows remote control of DMX devices like smoke machines, toggles the remote device on or off.
Key A, Key B, Key C, Key D
Soft keys to allow access and navigation of the LCD screen.
Menu
Allows access into specific functions like patch, ML set up, LED set up etc.
FX 1 - 12
Selects the relevant FX key to allow programming or playback of FX stacks 1 through 12.
Release
Clear the current operations. This is useful for resetting MLs and LEDs when you have finished programming with
them.
DMX Base
This key allows the FX keys to play back memories stored and created using DMX in or from offline programming.
7
Glossary of Terms