Philips 64331 Operation Manual page 34

Operations Manual
Recording Groups
To record a Group follow this sequence:
1) Select the fixture you want put it into the group using the fixture select buttons.
2) Press MENU button, then Press SOFTKEY C "Record Group" .
3) The Flash Buttons 1~24 (1-12 on the 12/24 version) will flash blue to indicate that no groups is stored in
that button. If the button is not lit it means there is a group already stored in it.
4) Press the flash button where you wish to store the group.
5) When you have stored the group press the MENU key to leave the record group function.
Note: It is possible to overwrite groups if you desire.
Selecting a Group
To select a group while in ML mode use SOFTKEY B "Recall Group" . Buttons 1 to 24 (1 to 12 on the 12/24
version) will now be the group select keys. If a button is lit blue it means there is a group stored in it.
Press the button associated with the group you wish to select. The moving lights are selected and the relevant Fixture
select button(s) are lit.
If you decide you do not wish to select a group press the SOFTKEY B again and this will exit Group select.
Focus
This function allows commonly used colors, gobos and positions to be stored as part of the Moving Lights fixture
library. It makes recalling a predefined color a simple task.
There are 10 Master Focus Groups. Each group can have up to 10 palettes associated with it. To access the Focus
function while in moving light mode, press SOFTKEY A . You will then have a list of the Focus Master Groups as per
the LCD display as shown in Figure 34.
3 2
CONSOLE ADVANCED OPERATION
ML Palette
Menu
Pan: 127
Release Tilt: 127
Color: Open
Dimmer: 255
Gobo: Open
DMX Base
FX
PL: 01 S000 T000
Figure 34: Focus - LCD Display
01.
A
Color
02.
B
Shutter
03.
C
Gobo
D
More.