Dmx In Show - Philips 64331 Operation Manual

Operations Manual
The show will run in the preview window. Figure 66 illustrates the preview screen.
You can change the number of fixtures that the show is applied to by selecting the Point window on the top left of the
screen.
Point 1 will be a single RGB or 3 channels. Point 10 would be 10 RGB fittings or 30 DMX channels. Point 170 will
be all 512 DMX channels. To work out how many channels will be played multiply the Point number by 3.
When you have set the required number of channels select "FILE CONVERT" .
You will be prompted to set the number of frames per second. You can select any number between 1 and 35.
You can then select a name for your show and a destination. It is recommended that you save it directly to your USB
stick under the DMX Base folder. If you store it elsewhere you will have to copy it to that folder later.
You can now load the show onto the console in the normal way, assign it to a FX Playback and run it.

DMX In Show

You will need to plug an external DMX512 source into the DMX Input connection on the rear panel of the console.
To record:
1) Press DMX BASE to enter the function, the DMX BASE Button will turn blue.
2) Press RECORD .
3) Select which FX Key you wish to store the show into, the FX Key will flash pink. The LCD display will
appear as shown in Figure 67.
6 0
SET UP FUNCTIONS
Figure 66: Preview Screen
Record DMX Base
Menu
A: BBT Record
Release B: DMX Record\
C: DEL BASE [XX]
D: DEL ALL BASE
Record Key: Exit
DMX Base
FX
PL: 01 S000 T000
Figure 67: DMX In Show Recording - LCD Display
BBT
A
Record
DMX
B
Record
Delete
C
Base
D
DelAll