Table of Contents
Advertisement
Select the Master Focus Group you want by pressing the relevant softkey. This will allow you access to the Palettes
associated with that fixture. Pressing the relevant softkey will select that palette. Figure 35 shows the LCD display
screen for the Master Focus Group for Gobos.
Menu
Release
DMX Base
FX
Figure 35: Master Focus Group for Gobos - LCD Display
Pressing the MENU button at anytime will take you back to the previous screen.
Details of how to set up Focus Master Groups and the palettes within them are covered in the Appendix of how to
create Moving Light and LED libraries.
Shape
The console comes with some built in movement effects for moving lights. To access these you need to go to
"Shape" by using SOFTKEY A on the second page of the ML LCD screen.
Once you access the Shape function you can select a Circle , Figure 8 , or Fan Function .
Circle
To program a circle:
1) Select the fixtures the shape is to be applied to by pressing the Fixture select button(s).
2) SOFTKEY D "Next" to move to the next LCD menu screen.
3) Select SOFTKEY A "Shape".
4) Select SOFTKEY A "Circle" as shown in Figure 36.
Menu
Release
DMX Base
FX
You can adjust the Pan and Tilt faders to set the Center position of the circle. The Radius of the circle can be adjusted
with the SOFTKEY A "Radius UP" and SOFTKEY B "Radius Down" .
Note: The direction of the circle can be toggled between CW (clockwise) and CCW (counter clockwise) using
SOFTKEY C .
ML Palette
Pan:
127
Tilt:
127
Color:
Open
Dimmer:
255
Gobo:
Open
PL: 01 S000 T000
Circle
Center Pan:
127
Center Tilt:
127
Radius:
CW
Master: xxx
Figure 36: Circle Selection Screen - LCD Display
200 Plus Series Console
01.
A
Open
02.
B
Gobo 1
03.
C
Gobo 2
D
More.
Radius
A
UP
Radius
B
Down
CW
C
D
Next
Moving Light (ML) Mode
33
- Quick Links:
- Product Descriptions
- Single Scene Operation
Hide quick links:
Advertisement
Table of Contents
