Dmx Patch (Associate An Address With A Channel); Default; Lcd Settings; Updating Console Software - Philips 64331 Operation Manual

• To exit without saving the changes press MENU .

DMX Patch (Associate an Address with a Channel)

This function allows you to associate a DMX address with a channel.
Use SOFTKEY B "DMX Patch" to select the function. The LCD display will appear as shown in Figure 63.
Figure 63: DMX Patch (Associate an Address with a Channel) - LCD Display
• Use SOFTKEY A "UP" and SOFTKEY B "Down" to raise or lower the value of the selected field.
• Use SOFTKEY C ">" to move between the DMX and Channel fields.
• Use SOFTKEY D "Enter" to save any changes you have made.
• Use MENU to exit without saving any changes you have made.
• It is possible to rapidly change the value of a field by using the FLASH LEVEL fader.

Default

This function will restore the DMX patch to a 1 to 1 basis. Channel Fader 1 will control DMX 1 ; Channel Fader 2
will control DMX 2 etc.
• Use SOFTKEY C "Default" to enter this function.
• Set the default patch by using SOFTKEY A "Yes" or exit without changing back to the default patch by using
SOFTKEY C "No" .

2. LCD Settings

This allows you to set the brightness and contrast of the LCD Screen on the console.
• Access by using SOFTKEY C "LCDSet" .
• Use SOFTKEY A "UP" or SOFTKEY B "Down" to change the setting.
• Use SOFTKEY C ">" to switch between the Contrast and Backlight functions.
• Use SOFTKEY D "Enter" to save the settings.

3. Updating Console Software

This function is available on the second page of the Setup Menus. You also need to insert the USB with the software
on it into the console.
You will need to insert the Password you have set for the console using the FX Keys to enter the number. Use
SOFTKEY D "Enter" to input the password.
To access console software update:
1) Press MENU key.
2) Press SOFTKEY D "Next" .
3) Press SOFTKEY A "Update SW" .
address Patch
Menu
Patch By Dimmer
Release
D: >001 C: 01
DMX Base
FX
Master: xxx
200 Plus Series Console
A
UP
B
Down
C
>
D
Enter
57
LCD Settings