Change Password - Philips 64331 Operation Manual

• SOFTKEY B "Fix DwLoad" will load all the fixture information to the console.
• SOFTKEY C "SubMst DwLoad" will load all the submaster information to the console.
• SOFTKEY D "Next" will bring up further options as shown in Figure 81.
• SOFTKEY A "ML DwLoad" will load all the ML information to the console.
• SOFTKEY B "Led DwLoad" will load all the LED information to the console.
• SOFTKEY C "Patch DwLoad" will load the DMX patch to the console.
• SOFTKEY D "Next" will give you more options as shown in Figure 81.
• SOFTKEY A "Factory Restore" will delete all information from the console and return it to the factory settings.
• SOFTKEY D "Next" will return you to the first screen of the Download menu.

10. Change Password

The console ships with a factory set password of 168168 . It is possible to change this password.
This function is on the third page of the menu screens.
To access Change Password:
1) Press MENU.
2) Press SOFTKEY D "Next" three times.
3) Press SOFTKEY B "Change Paswrd".
4) You will be prompted to enter your old password using the FX Keys of 1 to 10 . Note, 10 is 0 .
5) You will then be prompted to input your new password. You must input the new password - at prompt - a
second time to confirm it.
System Files
Menu
Release
DMX Base
FX
GM xxx
Figure 80: System Files Options - LCD Display
System Files
Menu
Release
DMX Base
FX
GM xxx
Figure 81: System Files Options - LCD Display
200 Plus Series Console
System
A
DwLoad
Fix
B
Dwload
SubMst
C
Dwload
D
Next
ML
A
DwLoad
Led
B
Dwload
Patch
C
Dwload
D
Next
Change Password
67