Timed Fades - Philips 64331 Operation Manual

Example:
1) Press the NEXT button to select the crossfade mode for single scene operation.
2) Make sure that the PRESET A MASTER and PRESET B MASTER faders are at the top.
3) Set the faders 1, 2, 3, 22, 23 and 24 to 100%. (as you move these faders to 100% you will see the intensities
of these channels come on)
4) Press the A STORE button. It will turn red.
5) Reset the faders so 10, 11, 12, 19, 20 and 21 are at 100%. You will see no change in these channels
intensities in real time.
6) Move the PRESET A MASTER and PRESET B MASTER FADERS to the bottom.
7) The A STORE button will flash.
8) Press the B STORE button it will turn red. The A STORE button will stop flashing.
9) Reset the faders so 5, 6, 7, 13, 14 and 15 are at 100%.
10) Move the PRESET A MASTER and PRESET B MASTER FADERS to the top.
11) The B STORE button will flash.
Congratulations! You have run three cues in Single Scene Mode.
When cross fade occurs the A STORE button will continue to flash until a scene is stored in the B STORE button.
This means a scene can be reused.
Example:
1) Press the NEXT button to select the crossfade mode for single scene operation.
2) Make sure that the PRESET A MASTER and PRESET B MASTER FADERS are at the top.
3) Set the faders 1, 2, 3, 22, 23 and 24 to 100%. (as you move these faders to 100% you will see the intensities
of these channels come on)
4) Press the A STORE button. It will turn red.
5) Reset the faders so 10, 11, 12, 19, 20 and 21 are at 100%. You will see no change in these channels
intensities in real time.
6) Move the PRESET A MASTER and PRESET B MASTER FADERS to the bottom. Channels 10, 11, 12,
19, 20 and 21 will be outputting at 100%.
7) The A STORE button will flash.
8) Move the PRESET A MASTER and PRESET B MASTER FADERS to the top.
9) Channels 1,2,3,22,23 and 24 will be outputting at 100%. The A STORE button will continue to flash.
10) Reset channels 7,8,9,14,15 and 16 to 100%.
11) Move the PRESET A MASTER and PRESET B MASTER FADERS to the bottom. Channels will be
7,8,9,14,15 and 16 outputting at 100%.
12) The A STORE button will flash.
13) Press the B STORE button. It will turn red. The A STORE button will stop flashing
14) Reset channels 10, 11, 12, 20, 21 and 22 to 100%.
15) Move the PRESET A MASTER and PRESET B MASTER FADERS to the top. Channels 11, 12, 20, 21
and 22 to 100% will be outputting. The B STORE button will flash.

Timed Fades

It is possible to set a fade time between scenes by using the STEP RATE fader. Make sure the FD/ST TIME button
is red by pressing the button as needed. When red, this indicates that the STEP RATE fader is in time mode. To apply
the time press the A and C soft buttons on the right of the LCD, the text will invert its colors to show the selection has
occurred. This will apply the time on the STEP RATE FADER to the PRESET A and PRESET B faders. Set the
time to the desired level. When you move the PRESET A and PRESET B faders the time will now be applied to the
transition. The LCD will show the time in the bottom Left window.
200 Plus Series Console
17
Single Scene Operation