Console Advanced Operation; Moving Light (Ml) Mode; Setting Up Moving Lights - Philips 64331 Operation Manual

Operations Manual

CONSOLE ADVANCED OPERATION

1. Moving Light (ML) Mode

It is possible to control up to 12 moving lights on the 12/24 console and 24 on the 24/48 console. Please be aware that
this is a basic moving light console with limited features and control interface. It is seen as suitable for smaller shows
that use moving lights occasionally and moving lights whose parameter set is limited. If you intend to use moving
lights with a high channel count on a regular basis, this console is not suitable for you.
A maximum of 20 Playbacks (8 Playbacks on the 12/24 version) can be recorded. Each playback can have a
maximum of 99 steps. Each step can have an individual fade time and wait time.
It is also possible to combine Moving Lights with generic fader channels and LEDs and save these into the FX stacks.
This functionality will be described in the section dealing with FX functions.

Setting Up Moving Lights

Before using Moving Lights, they need to be set up on the console.
Press the ML button to enter Moving Light mode. The button will turn pink to show it is selected.
Press the MENU SOFTKEY ; it will turn red to show menu is selected. The LCD screen will show the options
available for the setting up Moving Lights.
The first function we will consider is Channel SetUp.
Channel SetUp
This is used to set the range of DMX channels for use with Dimmers, LEDs and MLs.
The SOFTKEYS A through C are used to change the values and navigate the screen.
• SOFTKEY A "UP" will raise the value
2 4
CONSOLE ADVANCED OPERATION
Figure 21: Moving Light Set Up Main Screen - LCD Display
Figure 22: Channel SetUp Screen - LCD Display