Led Mode; Setting Up Led Lights - Philips 64331 Operation Manual

Operations Manual
Note: To unlock the console either press the MENU or RECORD keys. This will prompt you to enter the password
and unlock the console.

2. LED Mode

It is possible to control up to 12 LEDs on the 12/24 console and 24 LEDs on the 24/48 console.
A maximum of 20 Playbacks (8 Playbacks on the 12/24 version) can be recorded. Each playback can have a
maximum of 99 steps. Each step can have an individual fade time and wait time.
It is also possible to combine LEDs with Moving Lights and with generic fader channels and save these into the FX
stacks.

Setting up LED Lights

Before using LEDs they need to be set up on the console.
Press the LED button to enter LED mode. The button will change to Blue to show it is selected.
Press the MENU SOFTKEY . It will be lit red to show menu is selected. The LCD screen will show the options
available for the setting up of LEDs Lights.
The first function we will consider is Channel SetUp.
Channel SetUp
Used to set the range of DMX channels for use with Dimmers, LEDs and MLs.
• SOFTKEY A "UP" will raise the value
• SOFTKEY B "Down" will lower the value
• SOFTKEY C ">" is used to navigate between fields.
• To rapidly change values, hold down the Softkey or use the SOLO fader to change the values extremely quickly.
3 6
CONSOLE ADVANCED OPERATION
Led Menu Mode
Menu
Release
:
DMX Base
FX
Master: xxx
Figure 38: LED Menu Options - LCD Display
Channel Set Up
Menu
Release
Start
Dim:>001 052
LED: 053 153
DMX Base
ML: 154 512
FX
Master: xxx
LED
Patch
Channel
SetUp
Record
Group
Next.
UP
End
Down
>
Enter
A
B
C
D
A
B
C
D