Editing A Scene; Deleting A Scene - Philips 64331 Operation Manual

Operations Manual
5) Set the scene you require in the normal way by setting Channels, MLs and LEDs.
6) Hold down the flash button where you wish to store the scene.
7) Press SOFTKEY D "Cover" to store the scene.
8) Exit by pressing SOFTKEY C "Record FXBase" to update the FX stack.

Editing a Scene

It is possible to edit a scene in a FX stack.
1) To access this function press RECORD and then the FX where you to change a scene. The FX button will
flash blue.
2) Set the channels, MLs and LEDs to the state you want on stage.
3) Hold down the Flash button of the scene you wish to change. The LCD display will appear as shown in
Figure 55.
4) Press SOFTKEY D "Cover" .
5) The scene previously stored in that button will be replaced by the new scene you have set on stage.
6) Exit by pressing SOFTKEY C "Record FXBase" to update the FX stack.

Deleting a Scene

It is possible to delete a scene in a FX stack.
1) To access this function press RECORD and then the FX where you wish to delete a scene. The FX button
will flash blue.
2) Hold down the Flash button of the scene you wish to delete. The LCD screen will show as follows (see
Figure 55).
3) Press SOFTKEY C "Delete" .
5 2
FX MODE
Record FXBase
Menu
Release
DMX Base
FX
Master: xxx
Figure 55: Editing a Scene - LCD Display
Record FXBase
Menu
Release
DMX Base
FX
Master: xxx
Figure 56: Editing a Scene - LCD Display
Copy
A
To
B
Insert
C
Delete
D
Cover
Copy
A
To
B
Insert
C
Delete
D
Cover