Philips 64331 Operation Manual page 30

Operations Manual
3) The Preset B Flash Buttons are used to store the look or sequence you wish to program. If a button has
nothing recorded in it, it will flash. Press the Flash button where you want to record a scene. For instance
Select "PlayBack 1", it will flash red. The LCD will show the ML home page as below:
4) You can now adjust Pan, Tilt and Color using Preset B Faders 21, 22 , and 23 , the Intensity will be
controlled on the Preset A Fader to which the ML is assigned. Preset B Fader 24 can have the other
attributes of the moving light assigned to it. At the moment you will see, in the example, it controls Gobo. If
you use SOFTKEY C "Attrib" you will get a list of available attributes:
5) You can select the attributes you wish to control on Fader 24 by using the relevant SOFTKEY . For instance
for Shutter control you would use SOFTKEY B , the LCD screen will update to show you which attributes
you have control of. If there are more attributes than 3 you can cycle to them using SOFTKEY D , "More".
2 8
CONSOLE ADVANCED OPERATION
Record Playback
Menu
Pan: 127
Release Tilt: 127
Color: Open
Dimmer: 255
DMX Base Gobo: Open
FX
Master: 255
Figure 26: Recording a Scene in a Moving Light - LCD Display
Record Playback
Menu
Pan: 127
Release Tilt: 127
Color: Open
Dimmer: 255
DMX Base Gobo: Open
FX
PL: 01 S000 T000
Figure 27: Recording a Scene in a Moving Light - LCD Display
ML Attribute
Menu
Pan: 127
Release Tilt: 127
Color: Open
Dimmer: 255
Gobo: Open
DMX Base
FX
PL: 01 S000 T000
Figure 28: Adjusting Moving Light Attributes - LCD Display
A
B
C
D
A
Focus
B
Group
C
Attrib
D
Next.
A
Gobo
B
Shutter
C
P/T Macro
D
More.