Connecting Dmx512 - Philips 64331 Operation Manual

Operations Manual
Step 2. Connect DC connector from power supply to DC IN on console.
Power Input
Connector Pinout
9 to 12 Volts DC
0.5 Amps (min.)
Console On / Off Switch
Step 3. Connect power supply to AC supply source.
Step 4. Turn on console at Console On / Off Switch.
Note: You must connect the console to the lighting system via DMX512 before it is capable of providing control. See
"Connecting DMX512" on page 10

Connecting DMX512

The console provides two standard, female XLR 5-pin connector for connecting to DMX512 devices. DMX512 is for
outputting to a universe of DMX devices for your primary output. This can include dimmers, LEDs, and moving
lights. The port labeled DMX BASE is for outputting to a universe of LED devices. For more information on DMX
BASE, refer to
200 Plus Series Console Rear Panel
NOTES:
(1) DMX BASE is an advanced DMX512 port for the DMX BASE feature in the console. Please see
page 58
(2) The DMX512 connection is the primary DMX512 port.
Note: For more information on DMX512, refer to
1 0
INTRODUCTION
Figure 5: 200 Plus Series Control Console Power Connection
for more information.
"DMX Base" on page 7.
for details.
DMX512
Connectors Pinout
5
1
2
4
3
Figure 6: 200 Plus Series Control Console DMX512 Connection
200 Plus Series Console Rear Panel
DMX512 Input
DMX BASE
(1)
Pin
1
2
3
4
5
"Additional Resources for DMX512" on page
Power Input Connector
DMX512
(2)
"Update DMX Base" on
Signal
Ground
Data -
Data +
No Connection
No Connection
1.