Flashing Channels; Single Scene Operation - Philips 64331 Operation Manual

3) Set PRESET B faders 10, 11, 12 to 100%.
4) Ensure that the PRESET A and PRESET B faders have been selected in the LCD window.
5) Use the STEP RATE fader to set the desired time, 5 secs.
6) Move the PRESET A MASTER and PRESET B MASTER FADERS to the bottom quickly.
Note: The time will be used to control the crossfade.

Flashing Channels

Pressing the flash button (Bump Button) of any channel fader will flash that channel to the level set by the FLASH
MASTER. This will be added to the scene. If the SOLO button is selected then any channels flashed will come on
and all other channels will go to 0%.

2. Single Scene Operation

The monitor display is similar to that for Two Scene.
REV1.00 Strand Lighting
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
Submaster
Page: 01
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
Figure 11: Single Scene Operation - Video Monitor Display
200 Plus Series Console
1*96 GM: FL
Preset Effect
A B FX Base
FX1 FX2 FX3
FX4 FX5 FX6
FX7 FX8 FX9
FL FL
FX10 FX11 FX12
Single Scene Operation
15