Programming Leds - Philips 64331 Operation Manual

Operations Manual
It is possible to assign more than one fixture at the same time. If you wish to assign 4 fixtures of the same type, press
and hold the flash button where you wish to store the first fixture. Then press the flash button representing the fourth
fixture from the first fixture. (For example, if you start with fixture 5, then the fourth fixture will be fixture 8). You
will now have patched 4 fixtures of the same type.
Note: The 200 Plus will not allow you to over-patch fixtures. You will get a warning if you try and do this.
Repeat these steps until you have patched all the fixtures you have. When you have completed this process press
Menu to leave the set up functions
Note: To create a new or your own fixture library, see
LIBRARIES" on page

Programming LEDs

It is now possible to program the LEDs. The Preset A faders are used to set the intensity of the fixtures. The Preset
A Flash buttons are used to select fixtures. Once a fixture is selected it is possible to adjust its colors.
The colors are always controlled by Faders 21 through 24 . Fader 21 is always used for Red, Fader 22 for Green
and Fader 23 for Blue and they are labeled accordingly. Fader 24 can have an attribute, for instance Cool White
assigned to it for adjustment.
Recording an LED Scene or Chase
Your console allows you to edit and record various scenes for a patched LED. You may set the Intensity, Color and
any other attributes it has.
To record a LED scene or chase:
1) In LED mode, press the "RECORD" button. Press Preset B Flash button where you wish to store the
Scene or Chase.
2) Press the appropriate LED's flash button on the Preset A Flash button bank and it will turn red. The
monitor will show you the information for your LEDs (as shown in Figure 41).
3 8
CONSOLE ADVANCED OPERATION
70.
"CREATING MOVING LIGHT (ML) AND LED FIXTURE