Philips 64331 Operation Manual page 51

REV1.00
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
75 75 75 75
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
01 02 03 04 05 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
3) The Channel intensities are shown in the Channel Window and the Scene number is shown under FX1 in
the lower right window.
4) Press GO/STEP to playback the second scene.
5) Press GO/STEP to play back the third scene.
6) Press GO/STEP and we will go back to scene one.
7) To stop FX 1 press it and it will turn yellow. Now press START/STOP and the FX1 will turn red and all
outputs for FX1 will stop.
It is possible to now go back and add scenes into Flash Buttons 3 and 4 . If you do this and playback FX1 you will
see that the sequence will be 1, 2, 3, 4, 5 instead of the original 1, 2, 5. When programming this can be a useful tool to
build some core scenes and leave spaces if you are not sure you will need further cues between them.
If you want to record an FX stack to run as a chase then you can set a Step Time for each cue by using the FD/ST
TIME button to toggle between Step Time and Fade Time. The STEP RATE fader is then used to set the step time or
fade time required.
Example:
1) Go into Single Scene Operation.
2) Set Channels 1 to 4 at 100 %
3) Press RECORD .
4) Press FX2 (it will flash blue). The flash buttons on Preset A and Preset B will flash red.
5) Set the FD/ST TIME button to Step mode (it will be yellow). Set the STEP RATE Fader to 3.00, you can
see the step time changing in the lower left window of the LCD.
6) Set the FD/ST TIME button to Time mode (it will be red). Set the STEP RATE Fader to snap at the top of
the faders travel. You can see the fade time changing in the lower left window of the LCD.
Strand Lighting
Submaster
Page: 01
Figure 52: Playback FX Stack - Video Monitor Display
200 Plus Series Console
1*96 GM: FL
Preset Effect
A B FX Base
FX1 FX2 FX3
SP:01
FX4 FX5 FX6
FX7 FX8 FX9
FL FL
FX10 FX11 FX12
Playing Back an FX Stack
49