Edit Ports Confirm Window - HP XP7 User Manual

Item
Address (Loop ID)
Fabric
Connection Type

Edit Ports Confirm window

Confirm proposed settings, name the task, then click Apply. The task will be added to the execution
queue.
Selected Ports table
Item
Port ID
Attribute
406 LUN Manager GUI reference
Description
start up the storage system, HBA, or switch. When the transfer speed is not
the maximum speed, select the maximum speed from the list on the right or
remove and reinsert the cable.
Only 10 Gbps can be specified for the FCoE port. Auto cannot be specified
for the FCoE port.
Select the address of the selected port. Do not need to set the address to
the FCoE port.
Select whether a fabric switch is set to ON or OFF. Only ON can be
specified for the FCoE port.
Select the topology.
FC-AL: Fibre channel arbitrated loop
P-to-P (point-to-point). Only P-to-P can be specified for the FCoE port.
Caution: Some fabric switches require that you specify point-to-point
topology. If you enable a fabric switch, check the documentation for the
fabric switch to determine whether your switch requires point-to-point
topology.
Description
Identifier of the port.
Attribute of the port indicating I/O flow.
Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
Target: Receives I/O commands from a host.