Changing Monitoring And Tier Relocation Settings; Changing Monitoring Mode Setting - HP XP7 User Manual

8. In the Task Name text box, enter the task name.
You can enter up to 32 ASCII characters and symbols in all, except for \ / : , ; * ? " < > |.
The value "date-window name" is entered by default.
9. In the Confirm window, click Apply to register the setting in the task.
If the Go to tasks window for status checkbox is selected, the Tasks window appears.

Changing monitoring and tier relocation settings

The Storage Administrator (Provisioning) role is required to perform this task.
This topic describes how to change the following pool settings of Smart Tiers:
Automatic or manual execution of monitoring and tier relocation
Cycle time of monitoring and tier relocation
Time period of monitoring
To change monitoring and tier relocation settings:
1. In the Storage Systems tree on the left pane of the top window, select Pool.
2. From the Pools table on the right, click the row of the pool with the Smart Tiers setting you
want to change.
3. Click More Actions and select Edit Pools.
The Edit Pools window appears.
4. Check Tier Management.
5. From the Tier Management field, select Auto or Manual.
Normally Auto should be set.
When you select Auto, monitoring and tier relocation can automatically executed.
When you select Manual, monitoring and tier relocation can be executed with the RAID
Manager commands or the Pools window.
When you change the setting of Auto to Manual while performance monitoring and tier
relocation is executing, it is cancelled and is not performed since then.
6. If Auto is selected from the Cycle Time list, select the cycle of performance monitoring and tier
relocation.
7. Click Finish.
The Confirm window appears.
8. In the Task Name text box, enter the task name.
You can enter up to 32 ASCII characters and symbols in all, except for \ / : , ; * ? " < > |.
The value "date-window name" is entered by default.
9. In the Confirm window, click Apply to register the setting in the task.
If the Go to tasks window for status checkbox is selected, the Tasks window appears.

Changing monitoring mode setting

The Storage Administrator (Provisioning) role is required to perform this task.
To change monitoring mode setting:
1. In the Storage Systems tree on the left pane of the top window, select Pool.
2. From the Pools table on the right, click the row of the pool with the Smart Tiers setting you
want to change.
3. Click More Actions and select Edit Pools.
The Edit Pools window appears.
1 18 Configuring thin provisioning