Automatic Completion Of A Sim; Manually Completing A Sim - HP XP7 User Manual

SIM Code (XXX
= hexadecimal
pool number)
626XXX
627XXX
628000

Automatic completion of a SIM

Some SIMs are completed automatically when you resolve the problem that caused the SIM. SOM
734 must be enabled for automatic completion of a SIM. Automatic completion of a SIM removes
it from the system with no additional manual intervention. After the SIM is automatically completed,
the status of the SIM changes to completed.
The following SIMs are automatically completed when you resolve the problem causing the SIM.
SIMs 620XXX, 625000, and 626XXX are automatically completed if you increase pool
capacity by adding pool-VOLs because the condition that caused the SIM removed.
SIMs are automatically completed in the following cases:
◦
SIM 620XXX
If the usage level of THP pool number XXX falls below the warning threshold, SIM is
automatically completed.
◦
SIM 625000
If the usage level of each THP pool in all pools of the storage system falls below the
depletion threshold, SIM is automatically completed.
◦
SIM 626XXX
If the usage level of THP pool number XXX falls below the depletion threshold, SIM is
automatically completed.

Manually completing a SIM

The Storage Administrator (System Resource Management) role is required to perform this task.
Some SIMs must be manually completed to clear them from the system.
After the trouble that caused the SIM is solved, you can manually complete the SIM. After manually
completing a SIM, the status of the SIM changes to completed. If you complete the SIM before the
underlying cause is solved, the SIM may reoccur.
1. Perform the troubleshooting associated with the issued SIM. For details about troubleshooting,
see "Troubleshooting Thin Provisioning" (page
2. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
142 Configuring thin provisioning
Event Thresholds or Values
threshold. SOM 734
must be enabled.
Pool usage level 1% to 100% (in 1%
exceeded the increments).
Depletion Threshold
Default: 80%
Pool-VOL is blocked Not applicable
Protect attribute of Not applicable
Data Retention is set
Types of reports
Is the report Does it need
notified to completion
the host? operations from
Remote Web
Console?
Yes Yes
Yes No
Yes Yes
204).
Does it need
operations by the
operator?
No
Yes
Yes