HP XP7 User Manual page 51

1. In the Remote Web Console main window, in the Storage Systems tree, select the resource to
view in the tab, then click Create LDEVs.
2. In the Create LDEVs window, from the Provisioning Type list, select a provisioning type for the
LDEV to be created.
If creating internal volumes, select Basic.
If creating external volumes, select External.
3. In System Type, select Open to create open system volumes.
4. From the Emulation Type list, select an emulation type for the selected system type.
5. If creating an internal volume, select the parity group, then do the following:
1. From the Drive Type/RPM list in Parity Group Selection, select the drive type and RPM.
2. From the RAID level list in Parity Group Selection, select the RAID level.
3. Click Select Free Spaces.
4. In the Select Free Spaces window, in the Available Free Spaces table, select the free spaces
to be assigned to the volumes.
Do the following, if necessary:
- To specify the conditions and show the free space, click Filter, specify the conditions,
then click Apply.
- To specify the unit for capacity and the number of rows to view, click Options.
5. Click View Physical Location.
6. In the View Physical Location window, confirm where the selected free space is physically
located, then click Close.
7. In the Select Free Spaces window, if the selected free spaces have no issues, click OK.
6. Otherwise, if creating an external volume, select the external volume, then do the following:
1. Click Select Free Spaces.
2. In the Select Free Spaces window, in the Available Free Spaces table, select the free space
to be assigned to the volumes.
Do the following, if necessary:
- To specify the conditions and show the free space, click Filter, specify the conditions,
then click Apply.
- To specify the unit for capacity and the number of rows to view, click Options.
3. Click View Physical Location.
4. In the View Physical Location window, confirm where the selected free space is physically
located, then click Close.
5. In the Select Free Spaces window, if the selected free spaces have no issues, click OK.
7. If you want to offset the specified LDEV capacity by boundary, set the Offset boundary to ON.
If the emulation type is OPEN-V, Offset boundary is set to OFF by default.
If the emulation type is other than OPEN-V, Offset boundary is set to ON by default.
8. In LDEV Capacity, type the amount of LDEV capacity to be created and select a capacity unit
from the list.
Enter the capacity within the range of figures displayed below the text box. You can enter the
number with 2 digits after decimal point. You can change the capacity unit from the list.
9. In Number of LDEVs, type the number of LDEVs to be created.
If you create internal volume, Number of LDEVs per Free Space appears.
If you create external volume, Number of LDEVs per External Volume appears.
10. In LDEV Name, specify a name for this LDEV.
Create LDEV function 51