HP XP7 User Manual page 305

Item
Pool Type
RAID Level
Drive Type/RPM
Cache Mode
Protect V-VOLs when I/O fails to
Blocked Pool VOL
Protect V-VOLs when I/O fails to Full
Pool
Number of Pool VOLs
Number of V-VOLs
Number of Primary VOLs
Pool Capacity (Used/Total)
V-VOL Capacity (Used/Total)
Subscription (Current/Limit)
User-Defined Threshold
(Warning/Depletion)
Tier Management
Description
Displays the pool type.
For a Thin Provisioning pool, THP is displayed.
For a Smart Tiers pool, Smart is displayed.
For a Thin Provisioning Z pool, Mainframe THP is displayed.
For a Smart Tiers Z pool, Mainframe Smart is displayed.
For a Fast Snap pool, FS is displayed.
Displays RAID level. If multiple RAID levels exist in a pool, this field indicates
that RAID levels are mixed. If all pool-VOLs are external volumes, a hyphen (-)
is displayed.
Displays the data drive type and RPM of the pool. If multiple drive types or
RPMs exist in a pool, this field indicates that drive types or RPMs are mixed.
When the volume is the external volume, Drive Type displays External Storage
and the value of the external LDEV tier rank.
Displays whether the cache mode is enabled or disabled. For a configuration
other than external volume configuration, a hyphen (-) is displayed.
Displays whether the protect function for THP V-VOL is being enabled or
disabled. If the setting is enabled, when the pool-VOL is blocked, THP V-VOL
is protected from reading and writing requests. And at the same instant, the
access attribute of the THP V-VOL is changed to the Protect attribute.
A hyphen appears if the pool corresponds with one of following:
Data Retention is not installed.
Pool type is other than THP or Smart.
Displays whether the protect function for THP V-VOL is being enabled or
disabled. If the setting is enabled, when the pool usage reaches the full size,
THP V-VOL is protected from reading and writing requests. And at the same
instant, the access attribute of the THP V-VOL is changed to the Protect attribute.
A hyphen appears if the pool corresponds with one of following:
Data Retention is not installed.
Pool type is other than THP or Smart.
Displays the number of pool-VOLs set for the pool, and the maximum number
of pool-VOLs that can be set for the pool.
Displays the number of V-VOLs associated with the pool, and the maximum
number of V-VOLs that can be associated with the pool.
For a Fast Snap, a hyphen (-) is displayed.
Displays the number of primary volumes of the Fast Snap pairs. When the
applicable volume does not exist, a hyphen (-) is displayed.
Displays the used and total pool capacity. If the pool consists of multiple
pool-VOLs, the sum of its capacities is displayed in the Total field.
Displays the used and total V-VOL capacity. For a Fast Snap pool, a hyphen
(-) is displayed along with the used and total V-VOL capacity.
Displays the subscription (Rate of total V-VOL capacity associated with a pool
to the pool capacity/Subscription that is set).
For a Fast Snap, a hyphen (-) is displayed for Current or Limit.
Displays the user-defined threshold (Warning/Depletion).
For a Fast Snap, a hyphen (-) is displayed for Depletion.
If Smart Tiers or Smart Tiers Z is enabled, Auto or Manual is displayed. If Smart
Tiers or Smart Tiers Z is disabled, a hyphen (-) is displayed.
Pools: Volume tabs 305