HP XP7 User Manual page 316

Item
*System Type
*Multi-Tier Pool
*Pool Volume Selection
*Drive Type/RPM
*RAID Level
*Select Pool VOLs
Total Selected Pool Volumes
Total Selected Capacity
Resource Group
Performance
Total Capacity
Change Pool Configuration
Total Pool Volumes
Total Capacity
*Pool Name
316 Thin Provisioning and Smart Tiers GUI reference
Description
For following program products, select Thin Provisioning.
Thin Provisioning
Smart Tiers
Thin Provisioning Z
Smart Tiers Z
Select the system type.
If you select Fast Snap, only Open is displayed.
If Smart Tiers or Smart Tiers Z is enabled, Auto or Manual for performance
monitoring and tier relocation is displayed. If Smart Tiers or Smart Tiers Z is
disabled, a hyphen (-) is displayed.
Select the mode of the pool-VOL setting from Auto or Manual.
Select the data drive type and RPM of the pool-VOL. Mixable appears. When
the volume is the external volume, Drive Type displays External Storage. This
item is displayed when you select Manual as your Pool Volume Selection.
Select the RAID level of the pool-VOL. This item is displayed when you select
Manual as your Pool Volume Selection.
Mixable appears in the case of Thin Provisioning or Smart Tiers. A hyphen (-)
appears when External Storage is selected in the Drive Type/RPM list.
Opens the Select Pool VOLs window. Selecting a pool-VOL is mandatory. This
item is displayed when you select Manual as your Pool Volume Selection.
Displays the total number of the selected pool-VOLs. This item is displayed when
you select Manual as your Pool Volume Selection.
Displays the total capacity of the selected pool-VOLs. This item is displayed when
you select Manual as your Pool Volume Selection.
This item is displayed when you select Auto as your Pool Volume Selection.
Select the resource group name of the pool.
This item is displayed when you select Auto as your Pool Volume Selection.
Select the performance of the pool.
This item is displayed when you select Auto as your Pool Volume Selection.
Specify the total capacity of the pool.
This item is displayed when you select Auto as your Pool Volume Selection.
Opens the Change Pool Configuration Pattern window. You can change the
pool configuration that is automatically selected. For details, see
Configuration Pattern Window" (page
This item is displayed when you select Auto as your Pool Volume Selection.
Displays the total number of pool-VOLs.
This item is displayed when you select Auto as your Pool Volume Selection.
Displays the capacity of the pool created by the selected pool configuration.
Set the pool name.
Prefix: Enter the alphanumeric characters, which are fixed characters of the
head of the pool name. The characters are case-sensitive.
Initial Number: Enter the initial number following the prefix name, which can
be entered up to 9 digits.
You can enter up to 32 characters including the initial number.
"Change Pool
363).