Volume List - HP XP7 User Manual

Item
Apply
Cancel

Volume list

The volume list provides information about access attributes that are assigned to volumes.
Item
LDEV
Attribute
Emulation
Capacity
S-VOL
Reserved
Retention Term
Path
366 Data Retention GUI reference
Description
Applies settings to the storage system.
Discards setting changes.
Description
LDEV number.
: Read/write
: Read-only
: Protect
The symbol beside the LDEV number indicates:
#: an external volume
V: a virtual volume
X: a virtual volume used for Thin Provisioning
Access attribute assigned to this volume. These attributes can be assigned using the RAID
Manager (RAID Manager).
Read/Write: Both read and writer operations are permitted on the logical volume.
Read-only: Read operations are permitted on the logical volume.
Protect: Neither read nor write operations are permitted.
Volume emulation types.
Capacity of each volume in GB to two decimal places.
Indicates whether the volume can be specified as a secondary volume (S-VOL). You can
also use the RAID Manager to specify whether each volume can be used as an S-VOL.
Indicates the method that can be used to make LU path and command device settings.
Hyphen (-): Both RAID Manager and Remote Web Console can be used to make LU
path and command device settings.
RAID Manager: Only RAID Manager can be used to make LU path and command device
settings. Remote Web Console cannot be used to do so.
Period (in days) when you are prohibited from changing access attribute to read/write.
The retention term can be extended but cannot be shortened. During the retention term,
you can change read-only to protect, or vice versa.
500 days. Attempts to change access attribute to read/write are prohibited in the next
500 days.
Unlimited: The retention term is extended with no limits.
0 days: You can change access attribute to read/write.
Caution: In Data Retention, you can increase the value for Retention Term, but cannot
decrease the value.
Number of LU paths.