Adding A Selected Host To A Host Group; Adding A Host To The Selected Host Group - HP XP7 User Manual
Up to 8ptb
Hide thumbs
Also See for XP7:
- User manual (338 pages) ,
- Configuration manual (158 pages) ,
- Owner's manual (101 pages)
Table of Contents
Advertisement
Adding a selected host to a host group
The Storage Administrator (Provisioning) role is required to perform this task.
To add a host to a host group:
1.
Click Ports/Host Groups in the Storage Systems tree.
The list of available ports appear in the tree.
2.
Select the Hosts tab, or select a port from the tree then select the Hosts tab.
3.
Select a host which you want to add.
4.
Select Add to Host groups.
5.
Select the desired host groups from the Available Host Groups table, then click Add.
Selected host groups are listed in the Selected Host Groups table.
If you select a row and click Detail, the Host Group Properties window appears.
6.
Click Finish.
The Confirm window appears.
7.
In the Add to Host groups window, confirm the settings, in Task Name type a unique name
for this task or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
8.
Click OK to close the message.
Adding a host to the selected host group
The Storage Administrator (Provisioning) role is required to perform this task.
To add a host to the selected host group:
1.
Click Ports/Host Groups in the Storage Systems tree.
2.
Select the Host Groups tab.
3.
Select the host group to which the host is added.
4.
Select Add to Hosts.
5.
Select the desired host from the Available Hosts table, then click Add.
Selected host groups are listed in the Selected Hosts table.
If the desired host has never been connected with a cable to any port in the storage system,
perform the following steps:
1.
Click Add New Host under the Available Hosts list.
The Add New Host dialog box opens.
2.
Enter the desired WWN in the HBA WWN box.
3.
If necessary, enter a nickname for the host bus adapter in the Host Name box.
4.
Click OK to close the Add New Host dialog box.
5.
Select the desired host bus adapter from the Available Hosts list.
6.
Click Finish.
The Confirm window appears.
7.
In the Add to Host groups window, confirm the settings, in Task Name type a unique name
for this task or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
8.
Click OK to close the message.
Managing hosts 203
Advertisement
Table of Contents
Troubleshooting
