HP XP7 User Manual page 263

Item
LDEV Capacity
Number of LDEVs per Free Space, Number
of LDEVs, or Number of LDEVs per External
Volume
LDEV Name
Format Type
Initial LDEV ID
View LDEV IDs
Initial SSID
View SSIDs
CLPR
Description
Offset boundary:
◦
If you want to offset the specified LDEV capacity by boundary, set
the Offset boundary to ON.
◦
If the emulation type is OPEN-V, Offset boundary is set to OFF by
default.
◦
If the emulation type is other than OPEN-V, Offset boundary is set
to ON by default.
Input area: Specify the LDEV capacity to create in a free space, a pool,
or an external volume.
Detailed calculation of the LDEV capacity differs depending on the
specification of the unit. For details, see
(page 46).
Specify the number of LDEVs to create in a free space, pool, or the external
volume.
LDEV name. Specify the prefix characters and the initial number.
Prefix: A fixed character string.
Initial Number: The initial number of the LDEV name.
Specify the initial number according to the examples below. You can
specify up to 32 characters total.
Example:
◦
1: Up to 9 numbers are added (1, 2, 3... 9).
◦
08: Up to 92 numbers are added (08, 09, 10... 99).
◦
23: Up to 77 numbers are added (23, 24, 25... 99).
◦
098: Up to 902 numbers are added (098, 099, 100... 999).
Specify the format type. This appears when an internal or external volume
is used.
Quick Format: Quick formatting is the default format type. You cannot
select this when the provisioning type is something other than the internal
volume.
Write to Control Blocks: You can select this option when the external
mainframe volume is created. This is default when selecting the external
volume of the mainframe system.
Normal Format: Normal formatting.
No Format: Volumes are not formatted.
Specify the LDEV ID. LDKC is fixed to 00. Default of CU and DEV is 00:00.
For creating multiple LDEVs, select the interval of the assigned LDEV ID
from the Interval list.
Displays the View LDEV IDs windows.
Specify the SSID. The default is 0004.
When creating multiple LDEVs, specify the beginning number setting to
the LDEV.
Displays the View SSIDs window.
Cache logical partition number, displayed as ID:CLPR.
"Virtual LUN size calculations"
Create LDEVs wizard 263