HP XP7 User Manual page 95

Item Does each pool output
the log information?
Tier2 Used Yes
Tier3 Used Yes
Start Relocation Yes
Date
Start Relocation Yes
Time
End Relocation Yes
Date
End Relocation Yes
Time
Result Status Yes
Detail Status Yes
Does each V-VOL Type of information
output the log
information?
Yes Capacity
information
Yes Capacity
information
1
Yes Common
1
Yes Common
1
Yes Common
1
Yes Common
1
Yes Tier relocation result
1
Yes Tier relocation result
Description
Pages assigned to tier 2 at the start of tier
relocation.
Pages assigned to tier 3 at the start of tier
relocation.
Starting date of the tier relocation.
Starting time of the tier relocation.
Ending date of the tier relocation.
Ending time of the tier relocation.
Statuses of a tier relocation.
Normal End: A tier relocation ended
normally.
Suspend: A tier relocation suspended.
If the Result Status is Suspend, one of
following reasons is displayed.
Monitor discarded: Suspended due to the
discard of monitoring data.
End of cycle: Suspended due to
incomplete tier relocation during a
monitoring cycle.
End of cycle: Suspended due to
incomplete tier relocation during a
monitoring cycle.
Requested by user: Suspended due to
request by a user.
Threshold exceeded: Suspended because
the used capacity of pools reaches a
threshold due to a tier relocation. When
the used capacity of a pool reaches the
depletion threshold, this reason is logged.
Cache blocked: Suspended because a
cache memory is blocked.
Volume blocked: Suspended because an
LDEV which is pool-VOL or V-VOL is
blocked.
The tier management changed
(Auto/Manual): Suspended because the
tier management mode is changed from
Auto to Manual, or Manual to Auto.
Other reasons: Suspended for reasons
other than the above, such as:
A V-VOL was specified as the
secondary volume of the Continuous
Access Synchronous pair and an initial
copy operation was performed.
A V-VOL was specified as the
secondary volume of the High
Smart Tiers
2
95