Enabling/Disabling Tier Relocation Of A Thp V-Vol; Deleting A Thp V-Vol - HP XP7 User Manual

4. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.

Enabling/disabling tier relocation of a THP V-VOL

The Storage Administrator (Provisioning) role is required to perform this task.
You can enable or disable tier relocation of individual THP V-VOLs or on all THP V-VOLs.
THP V-VOLs on which tier relocation is disabled are excluded from the targets for the tier range
calculation, and are not reflected in the performance information of pools. If tier relocation is
disabled on all THP V-VOLs in a pool, performance information of a pool is unavailable in the
View Tier Properties window.
1. In the Remote Web Console main window, in the Storage Systems tree, select Logical Devices.
The following is another way to select LDEVs.
1. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
2. Select the pool associated with the THP V-VOL for which tier relocation is to be enabled
or disabled.
3. Click the Virtual Volumes tab.
2. From the table, select the THP V-VOL for which tier relocation is to be enabled or disabled.
3. Click More Actions, then select Edit LDEVs.
4. In the Edit LDEVs window, check tier relocation and select Enable or Disable.
Enable allows tier relocation to be performed to the THP V-VOL.
Disable do not allow tier relocation to be performed on the THP V-VOL in the case of both
automatic and manual tier relocation.
5. Click Finish.
6. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.

Deleting a THP V-VOL

The Storage Administrator (Provisioning) role is required to perform this task.
You cannot delete a THP V-VOL if the status is online.
1. In the Remote Web Console main window, in the Storage Systems tree, select Logical Devices.
The following is another way to select LDEVs.
1. In the Remote Web Console main window, in the Storage Systems tree, select Pool. The
pool name appears below Pool.
2. Select the pool associated with the THP V-VOLs to be deleted.
3. Click the Virtual Volumes tab.
2. From the table, select the THP V-VOL to be deleted.
Do the following, if necessary.
In the Filter option, select ON to filter the rows.
Click Select All Pages to select all THP V-VOLs in the list.
Click Options to specify the unit of volumes or the number of rows to view.
3. Click More Actions, then select Delete LDEVs.
The Delete LDEVs window opens.
156 Configuring thin provisioning