Installing the Micro SD Card
Step 1: Loosen the screw on the back cover of the NQuire and remove the back cover. Slide the slot
cover rightward and lift the left end of it.
Step 2: Insert the Micro SD card into the slot, with its metal contacts facing down.
Step 3: Close the slot cover and slide it leftward until it clicks.
Step 4: Replace the back cover and fasten it with the screw removed in Step 1.
Enabling MTP
MTP (Media Transfer Protocol) lets you transfer files between your NQuire and a PC. To enable it, follow
the steps below:
Step 1: Connect the USB Host/Slave port on the NQuire to PC with a USB cable (purchase separately).
USB Host/Slave port
Step 2: Follow the steps described in the "Using the ADB" section in Chapter 7 to enable OTG. Tap
to return to the Settings menu.
8