1. Manuals
  2. Brands
  3. Newland Manuals
  4. Touch terminals
  5. NL-8510 POS
  6. User manual

Newland NL-8510 POS User Manual

Desktop pos with thermal printer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Newland NL-8510 POS

Summary of Contents for Newland NL-8510 POS

  • Page 2: Table Of Contents

    ■ NL-8510 POS user manual catalogue 1 Manual Description........................1 1.1 Introduction.........................1 2 Start..............................1 2.1 Introduction.........................1 2.2 Familiar with POS.......................1 2.2.1 unpacking .........................1 2.2.2 Housing and elements ....................2 2.2.3 Product's detailed functional description..............2 2.2.4 Interface functions and PIN definition ..............3 2.3 Startup/shutdown/reboot .....................7 2.4 Main Boot Menu and its functions..................7...
  • Page 3 ■ NL-8510 POS user manual 5.1 safety caution ........................37 5.1.1 Daily usage safety caution ..................37 5.1.2 Power ........................37 5.1.3 The Handling of Disused Products.................37 5.2 Other Cautions ........................38 5.3 Install Printing Paper (Important) ..................38 5.4 Troubleshooting ........................40...

  • Page 4: Manual Description

    ■ NL-8510 POS user manual 1 Manual Description 1.1 Introduction NL-8510 is a newly introduced desktop POS with thermal printer. This manual gives descriptions on how to properly use NL-8510. 2 Start 2.1 Introduction This chapter will introduce NL-8510 from unpacking to deeply. It includes housing, principles, detailed description of functions, PIN definition, and the function of each interface, settings and other relevant operation.

  • Page 5: Housing And Elements

    ■ NL-8510 POS user manual 2.2.2 Housing and elements 2.2.3 Product's detailed functional description Clock Display the correct time track 1//2/3 reading;ISO7816. supports 75 BPI and 210BPI and Magcard bi-directional swipe. 128*64 LCD, EL backlight, adjustable contrast, support standard ASCII characters, GB18030/GB2312 Chinese Character and graphical document.

  • Page 6: Interface Functions And Pin Definition

    ■ NL-8510 POS user manual Supports two SAM cards, can read and write CPU card which meet SAM card the standard of ISO7816. Support Chinese financial IC card criterion. (Optional)Built-in RF function, support type A protocol. Two RS232 serial ports, one for serial port communication, one Peripheral interface for PINPAD connection.
  • Page 7 ■ NL-8510 POS user manual 二、Ethernet network（LAN） 1． Function：Built-in 10M Ethernet interface, supports Ethernet communication。 2． The description for the PINs of this interface: PIN1：Data sending positive PIN2：Data sending negative PIN3：Data receiving positive PIN4：GND ESD protection PIN5：GND ESD protection PIN6：Data receiving negative PIN7：GND ESD protection...
  • Page 8 ■ NL-8510 POS user manual 四、Serial Port 2 (PINPAD) 1．Function：The main CPU is connected to the RS232 chip via CPLD . This is for serial communication device。 2．The description for the PINs of this interface: PIN1：Data sending PIN2：DC output +5V PIN3：Null...
  • Page 9 ■ NL-8510 POS user manual 六、IC card 1． Function： The IC card uses IC card interface chip to connect with the secondarysecondary CPU, whichSecondary CPUcan read and write the IC card data。 2．The description for the PINs of this interface（Please refer to the standard of ISO7816） ：...

  • Page 10: Startup/Shutdown/Reboot

    ■ NL-8510 POS user manual 2.3 Startup/shutdown/reboot 2.3.1 Startup Press the “menu” button for 1 sec, LCD display the light; POS is ready to use 2.3.2 shutdown Press the”menu” button for 3-5 sec, shut the pos down. 2.3.3 Reboot If there are some special reason to let the POS fail to use, can use startup and shut down to reboot the POS 2.4 Main Boot Menu and its functions...

  • Page 11: Program Download

    ■ NL-8510 POS user manual figure 3-1 Download: download user-program, Key managment program, download files to flash disk, remote download user-program, remote download files to flash disk. Self-check: Individual test of every function module, If you want to test whether a particular module works before usage or development, this self-test can perform basic functional test.
  • Page 12 ■ NL-8510 POS user manual Then the main window will be shown. Selecting the download type This tool supports downloading of 3 different files: user program, key program and normal file. They will be downloaded into different storage space respectively, i.e., User Program will be...
  • Page 13 ■ NL-8510 POS user manual Stopping/Cancelling a download session and closing the COM port Click on the Stop(S) button to stop/cancel a download session or close the COM port. Selecting the COM port Click on the pulldown list Port to select a suitable com port for download. Notice that you cannot change the COM port setting after a download session has been started.

  • Page 14: The Testing On Functional Modules

    ■ NL-8510 POS user manual 3 The testing on functional modules In order to facilitate the technical maintenance staff on-site maintenance for this product, problem positioning and hardware repair. We provide this self-check program in the BIOS. Using this program you can do all the manual testing on each of the POS’sthe functional module. .

  • Page 15: Version

    ■ NL-8510 POS user manual 3.1 Version The first page will display software version: main CPU, secondary CPU, file system, micro print device version, for detail display please see figures 3-1. Main CPU：VB020 Sub-CPU：A114AV302 File System 9.33 Printer Driver：1.0 figure 3-1 Version Info Press Key “Enter”...

  • Page 16: Keyboard

    ■ NL-8510 POS user manual 3.2 Keyboard To test the keyboard。 First to test if the key name matches the key code, for example: press “2” to see if code 2 is entered. For detail display please see the figure 3-3.

  • Page 17: Magcard Test

    ■ NL-8510 POS user manual Press Key “backspace” to start scanning the flash disk then press any key to display the total number of existing files and a whole file lists with file name, creation time and other information, shown as figure 3-7 Press“ESC”to quit and press other keys to see the next...

  • Page 18: Other Card

    ■ NL-8510 POS user manual According your need, select the track numbers to be read; support bi-directional swipe; when swiping the card, the magnetic stripe should be facing the LCD. After the swiping, the LCD will display the detail data of each track. At the menu shown in figure 3-8 press “ESC” to quit then enter the menu shown as figure 3-9.
  • Page 19 ■ NL-8510 POS user manual IC/SAM Card Testing. Read IC Card 1’s ATR and Random Number as well as IC Card’s power up/down, SAM1 card, SAM2 card, SAM4 card (ESIM card) card’s power up/down， random number reading test. If the IC or SAM Card testing is passed,the menu will be shown as figure 3-11 ××××××...

  • Page 20: Mifare Card

    ■ NL-8510 POS user manual 3.5.2 MIFare Card Please put the RF Card on the cover of print cartridge orhold the MIFare Card close to the right of the print cartridge. Under the menu shown as figure 3-10, press Key “2”to enter MIFare Card test. Under the menu shown as figure 3-12, if the MIFare card is at the correct reading position, press “enter”...

  • Page 21: Printer

    ■ NL-8510 POS user manual 3.6 Printer 1. Test Paper 2. Blank Paper 3. Filled Paper 1. Single 4. Erect stripe 2. Multiple 5. Bill Paper printer 6.Continuous 3. Compress ENTER Print Temperature and 4. Get Status voltage detector 3.6.1 Printer Test Menu...

  • Page 22: Printer Test Submenu

    ■ NL-8510 POS user manual of selection content ④ Press Key “4” to perform Print Status Testing, which means to check if the printer head temperature and voltage is within normal range. 3.6.2 Printer Test Submenu ①Under the printer test menu shown in figure 3-13, if you press Key 1, Key 2 or Key 3 for different testing page, a submenu shown as figure 3-14 will show up.
  • Page 23 ■ NL-8510 POS user manual b、Under the menu shown as figure 3-14, Press Key “2” to print the Blank Page, which is usually used to adjust the printer head moving speed. c、Under the menu shown as figure 3-14, Press Key “3” to print the filled page, which is a black rectangle.

  • Page 24: Communication

    ■ NL-8510 POS user manual 3.7 Communication 1. AUX1 Test 2. AUX2 Test 1.AUX Test 3. AUX Selftest 4. AUX 1/2Direct Connect 1. SYN Dial 1. Simple dial 2.Wire 2. ASYN Dial modem 1.Country setting 2. Advanced dial 2. Dial 1.

  • Page 25: Communication Test Main Menu

    ■ NL-8510 POS user manual 3.7.1 Communication test main menu Figure 3-16 is the main menu of communication test __Communication__ 1 AUX Test 2WireMODEM 3 PPP Test 4 WirelessMODEM 5 Ethernet figure 3-16 3.7.2 Communication test submenu ①Under the menu shown as figure 3-16, Press Key “1” at this menu to perform Aux Port...
  • Page 26 ■ NL-8510 POS user manual initialization setting may not be changed. Ⅲ Enter data packet length, timeout and content. Ⅳ Aux Port sends and receives data and then match the data sent and received to check if they are identical. The menu will be shown as Figure 3-19...
  • Page 27 ■ NL-8510 POS user manual The method of direct connecting test: Take two serial cables; plug one end of each cable into POS’s RS232 port and PINPAD port respectively; plug the other end of each cable into PC’s serial ports.
  • Page 28 ■ NL-8510 POS user manual a.Under the menu shown in figure 3-21, press Key “1” to enter simple dial-up menu shown as figure 3-22 _MODEM Test__ 1. SYN Dial 2. ASYN Dial figure 3-22 Ⅰ Under the menu shown as figure 3-10 ,Press Key “1”.On synchronization dial state:...
  • Page 29 ■ NL-8510 POS user manual Ⅰ Under the menu shown as figure 3-23, Press Key “1” to enter Country Setting as shown in figure 3-24. Press Key “5” to select Normal Mode (detect answer tone when dialing); Press Key “4” to select Huawei NAC (no detection of answer tone when dialing);...
  • Page 30 ■ NL-8510 POS user manual ____ Init MODEM____ 1 Normal speed 2.Reset Modem 3.Special set figure 3-26 Display that the information function as follow: Constant speed: Using AT command to carry out modem initialization. Reset: There is soft reset and hard reset; soft rest is done by using AT command.
  • Page 31 ■ NL-8510 POS user manual PPP is point to point communication protocol Wire modem is using the telephone line to make the connection, be prepared to use the telephone lines. Wireless modem is using GPRS or CDMA network to make the connection, the POS must have the wireless module.
  • Page 32 ■ NL-8510 POS user manual State:0 DEAD 00000000 figure 3-32 C.TCP TEST is not yet available. Under the menu shown as figure 3 -16, press Key “4” to enter wireless modem menu, ④ shown as figure 3-33 ____MODEM API____ 1 Reset...
  • Page 33 ■ NL-8510 POS user manual f、 Under the menu shown as Figure 3-33, press Key“6”initiate serial port baud rate ⑤Under the menu shown in Figure 3-16, press Key “5” to perform Ethernet Test, shown as Figure 3-35 ____Ethernet____ 1 MAC...

  • Page 34: Operational Parameter Setting

    ■ NL-8510 POS user manual 4 Operational parameter setting The Management menu is used to set the parameters for POS. Before you go to the management menu, you need to enter the password “159951”, figure 4-1 is the management menu diagram.

  • Page 35: Display

    ■ NL-8510 POS user manual 4.1 Display LCD display setting, shown as figure 4-2.: 1.Cont rast 2.Screen Turn Left/Right 3. Screen Turn Left/Right 4.Shift Left figure 4-2 ① Contrast ratio: Setting the contrast radio of LCD, can change the definition of LCD.

  • Page 36: Clock

    ■ NL-8510 POS user manual 4.3 Clock shown as figure 4-4: Adjust Date, 1.Change Date 2.Change Time 3.Startup Clock Style ESC...To back figure 4-4 ① Under the Menu shown in figure 4-4, press Key “1” to change the Date, shown as figure 4-5;...

  • Page 37: Password

    ■ NL-8510 POS user manual 4.4 Password Setting the security protection of POS, shown as figure 4-8: ⒈ Set supper password ⒉ Set download password Set selftest purview ⒊ figure 4-8 ① Setting super password: you need to input this password to enter management menu. The factory default setting is “159951”.

  • Page 38: Printer

    ■ NL-8510 POS user manual ① YES: When POS is booting, wait for 2 sec at the main menuthen the POS will run the user program automatically ② NO: When POS is booting, the POS will stay at the main menu, user can choose to run the user program manually.

  • Page 39: Hardware

    ■ NL-8510 POS user manual 4.8 Hardware Check hardware setting, shown as figure 4-13: ――Hardware Setup―― 1.Serial No figure 4-13 Check the customer series number; it must be identical to the one written on the back label. 4.9 Communication Communication setting is about setting the default communication method. Base on different kind of setting, applications use the API interfaces provided by BIOS firmware for retrieving relevant data.

  • Page 40: Notices

    To avoid electric shock, disconnect the power before cleaning. Do you use AC plug in outdoor or moist environment. Use original Power Supply Only. If the plug does not fit with the mains jack, please contact Newland Service Team for replacing or ask an electrician to install a suitable mains jack 5.1.3 The Handling of Disused Products...

  • Page 41: Other Cautions

    ■ NL-8510 POS user manual 5.2 Other Cautions POS’s wireless module may produce electromagnetic wave, which may interfere other equipment, so wireless function must be prohibited in certain locations such as airplane cabin and gas station. Charging and Communication in dangerous locations are strictly prohibited.
  • Page 42 ■ NL-8510 POS user manual Improper paper loading leads to printing halt and causes damage...

  • Page 43: Troubleshooting

    ■ NL-8510 POS user manual 5.4 Troubleshooting LCD screen does not work Check the mains wire is correctly connected to mains jack Check the mains wire is correctly connected to power adapter Check the power adapter is correctly connected to the POS...

Table of Contents