Table of Contents
Advertisement
Chapter 8 Using an External Barcode Scanner
Introduction
Usually users scan a barcode by presenting it the NQuire. However, that may pose a challenge to them
when scanning heavy, oversized or bulky items. In this case, using an external handheld barcode scanner
can be an ideal solution.
Connecting a Barcode Scanner to the NQuire
Users can connect one of the Newland barcode scanners listed in this Chapter to the USB Host/Slave port
or the USB Host port on the NQuire with a USB cable (purchase separately). When using the USB
Host/Slave port, OTG must be disabled by unselecting "Enable OTG" on the NQuire. For more information,
see the "Using the ADB" section in Chapter 7.
USB Host/Slave port
Configuring an External Barcode Scanner
The following sections provide the programming barcodes users may need to configure an external
barcode scanner to work with the NQuire.
USB Host port
46
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
