Nquire Command Set - Newland NLS-NQuire300 User Manual

NQuire Command Set

ESC HEX DEC
ESC 24 or 25 36 or 37 $ or %
ESC 27 39
ESC 2C 44
ESC 2E 46
ESC 42 66
ESC 5A 90
ESC 5B 91
ESC 5E 94
1
The actual pixel position depends on the currently selected font set:

Every x-position is a multiple of 8 pixels.

Every y-position depends on the currently selected font set (height of 24 or 32 pixels)

<POS>: 0-15 (0x30 - 0x3F)

<LINE>: 0-4 (0x30 - 0x34)
2
This allows a text to be displayed anywhere on the screen. Note that a character will be partly displayed
when it does not fully fit on the screen.

<POS>: 0-127 (0x30 - 0xAF)

<LINE>: 0-63 (0x30 - 0x6F)
3
Display a text, using the currently selected font set, on a calculated position on the screen.
<ALIGN> DESCRIPTION
0x30 Left top
0x31 Center top
0x32 Right top
0x33 Left center
0x34 Center
0x35 Right center
0x36 Left bottom
0x37 Center bottom
0x38 Right bottom
CHAR DESCRIPTION
Clear the screen and move
the cursor to the top-left
corner of the screen.
'
Set the cursor position
, Set the current pixel position² <POS> 0x30-0xAF
. Align a string of text³
B Select a font set
Small font: 0x30
Large font: 0x31
Z Reboot the NQuire
[ Enable/disable barcode
scanning
ˆ
Generate the default beep
1
<POS> 0x30-0x3F
<ALIGN>0x30-0x3E
<FONTSET>0x30-0x31
<MODE>
Disable: 0x30
Enable: 0x31
<ALIGN>
0x39 Left, using current y-coordinate
0x3A Center, using current y-coordinate
0x3B Right, using current y-coordinate
0x3C Top, using current x-coordinate
0x3D Center, using current x-coordinate
0x3E Bottom, using current x-coordinate
34
PARAMETER
<LINE> 0x30-0x34
<LINE> 0x30-0X6F
<DATA>"..."[0x03]
DESCRIPTION