Installing The Micro Sd Card; Enabling Mtp - Newland NLS-NQuire350 User Manual

Installing the Micro SD Card

Step 1: Loosen the screw on the back cover of the NQuire and remove the back cover.
Slide the slot cover rightward and lift the left end of it.
Step 2: Insert the Micro SD card into the slot, with its metal contacts facing down.
Step 3: Close the slot cover and slide it leftward until it clicks.
Step 4: Replace the back cover and fasten it with the screw removed in Step 1.

Enabling MTP

MTP (Media Transfer Protocol) lets you transfer files between your NQuire and a PC. To
enable it, follow the steps below:
Step 1: Connect the USB Host/Slave port on the NQuire to PC with a USB cable (purchase
separately).
USB Host/Slave port
8