Introduction
This guide provides instructionsfor installing, programming and operating the NLS-NQuire300 seriescustomer information
terminal (hereinafter referred to as "the NQuire").
Chapter Descriptions
Chapter 1 About This Guide
Chapter 2 Getting Started
Chapter 3 Configuring the NQuire
Chapter 4 Using the NQuire
Chapter 5 ESC Commands
Chapter 6 System Update
Chapter 7 ADB Debug
Chapter 8 Using an External Barcode Scanner Describes how to configure an external handheld barcode scanner to
Chapter 9 Maintenance & Troubleshooting
Appendix
Chapter 1 About This Guide
Provides general description of this manual.
Provides information on getting the NQuire up and running for the first
time.
Describe how to program the NQuire with a web-based tool and with
barcodes.
Explains how to scan barcodes and read RFID tags.
Explains how to control the NQuire with ESC commands.
Introduces two methods to update system.
Describes how to use the ADB tool.
work with the NQuire.
Provides troubleshooting solutions for issues that might occur when
using the NQuire.
Provides some sample barcodes for the user to test the NQuire.
1