Work Procedure; Mounting - Newland NLS-NQuire300 User Manual

Work Procedure

1. The NQuire receives its input via:

1D barcode scan engine (NQuire301) or

2D barcode scan engine (NQuire302/ NQuire304) or

RFID reader.
2. The NQuire sends the input to application program which runs on a remote PC or server.
3. Application program sends information back to the terminal for display.

Mounting

The NQuire comes standard with a VESA 75 mount. The VESA 75 mount consists of a bracket and a
chassis. Please follow the instructions below to mount the NQuire onto the VESA 75 mount.
Step 1: Select a mounting location that is convenient for operation.
Step 2: For wall mounting, install the four plastic expansion anchors in a wall and then secure the bracket
of VESA 75 mount to the wall using the four large screws. For countertop/shelf mounting, secure the
bracket of VESA 75 mount to a countertop/shelf using the four large screws.
Step 3: Attach the chassis of VESA 75 mount to the back of the NQuire using the four small screws.
Step 4: Follow the instructions in the following "Wiring" section to complete the cable connections. Then
slide the NQuire into the bracket.
5