Table of Contents
Advertisement
According your need, select the track numbers to be read; support bi-directional swipe; when
swiping the card, the magnetic stripe should be facing the LCD. After the swiping, the LCD will
display the detail data of each track. At the menu shown in figure 3-8 press "ESC" to quit then
enter the menu shown as figure 3-9.
Under this menu, you can manually enter MagCard Number or Insert an ICC for testing. The POS
will read the IC Card's ATR (Answer to Request) data. Press "ESC" to quit this test, as shown in
figure 3-9.
3.5 Other card
Card Test menu is shown as figure 3-10
3.5.1 IC/SAM
Under the menu shown as figure 3-10, Press Key "1" to enter IC and SAM Card test.
――Magcard Test――
1.The 2&3 Track
2. The 2 Track
3 The 3 Track
4. The 1&2&3 Track
Allow Input
figure 3-9
1. IC/SAM
2. MIFare Card
figure 3-10
■ NL-8510 POS user manual
15
Advertisement
Table of Contents
