Settings; Upload; Reset; Dimmer - SHOWTEC City Painter 9000 LED Manual

City Painter 9000 LED
01) Press the MENU button until the display shows
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to toggle between the following DMX channel modes:
TOUR: 11 channels
ARC.1: 3 channels
AR1.D: 4 channels
ARC.3: 5 channels
AR3.D: 6 channels

6. Settings

With this menu you can set the device's settings.
01) Press the MENU button until the display shows
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to toggle between the menus described below.

6.1 Upload

With this menu you can export current programs from the master device to the connected slave devices.
01) Press the UP/DOWN buttons until the display shows
02) Press the SET button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the SET button to confirm.
04) The display will show
05) While exporting, the devices will light up yellow.
06) If there are any problems with exporting, the master and the slave devices will light up red.
07) If the operation is completed successfully, the master and the slave devices will light up green.

6.2 Reset

With this menu you can reset the custom programs.
01) Press the UP/DOWN buttons until the display shows
02) Press the SET button to open the menu.
03) Insert the password: UP>DOWN>UP>DOWN and press the SET button to confirm.
04) The display will show END and the custom programs will have been reset.

6.3 Dimmer

With this menu you can adjust the dimmer.
01) Press the UP/DOWN buttons until the display shows
02) Press the SET button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 dimmer speed options (DIM1-DIM4, from fast to
slow) and OFF.
04) If you choose OFF, then RGBW and the master dimmer are linear.
05) The dimmer settings do not have any influence on the device's performance in DMX TOUR mode.
The DMX settings override the dimmer settings.
Ordercode: 40910
AR3.S: 7 channels
HSV: 3 channels
.
18
.
.
.
.
.