Related Manuals for SHOWTEC PowerBOX 4
Summary of Contents for SHOWTEC PowerBOX 4
- Page 1 MANUAL ENGLISH PowerBOX 4 Ordercode: 90661 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
PowerBOX 4 Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Connection with the mains............................4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Frontside..................................6 Backside ..................................7 Installation ................................... 7 Set Up and Operation ............................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • Showtec PowerBOX 4 Pro power cable 1,5 m • User manual •... - Page 4 For replacement use fuses of same type and rating only. • The user is responsible for correct positioning and operating of the PowerBOX 4. The manufacturer will • not accept liability for damages caused by the misuse or incorrect installation of this device.
-
Page 5: Operating Determinations
Improper installation can cause serious damage to people and property! The PowerBOX 4 can be placed on a flat stage floor or attached to any kind of truss, with the 90659 – PowerBOX clamp or the D9575B – Snap Fastener 22. -
Page 6: Return Procedure
PowerBOX 4 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 7: Description Of The Device
The Showtec PowerBOX 4 can be used as a power supply for lighting or back-line equipment. The PowerBOX 4 is equipped with 1 x Pro power connector IN and 2 x Pro power connector OUT. Apart from that, there are also 4 x Schuko power outputs. -
Page 8: Backside
05) 220-240V Pro power connector OUT Installation Remove all packing materials from the PowerBOX 4. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 9: Maintenance
04) The electric power supply cables must not show any damages or material fatigue. The PowerBOX 4 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. -
Page 10: Product Specification
PowerBOX 4 Product Specification Model: Showtec PowerBOX 4 Input voltage: 220-240V AC, 50Hz Power consumption: Power output: 10A RMS/16A peak Dimensions: 335 x 90 x 75 mm (LxWxH) Weight: 0,8 kg Operating and Programming: Power connections: Pro power connector IN/OUT, 4 x Schuko OUT... - Page 11 PowerBOX 4 Ordercode: 90661...
- Page 12 ©2016 Showtec...
Need help?
Do you have a question about the PowerBOX 4 and is the answer not in the manual?
Questions and answers