Headers - Rabbit RCM3365 User Manual

A.1.1 Headers
The RCM3365/RCM3375 uses headers at J3 and J4 for physical connection to other
boards. J3 and J4 are 2 × 17 SMT headers with a 2 mm pin spacing. J1, the programming
port, is a 2 × 5 header with a 1.27 mm pin spacing.
Figure A-3 shows the layout of another board for the RCM3365/RCM3375 to be plugged
into. These reference design values are relative to the mounting hole.
RCM3300 Series
Footprint
Figure A-3. User Board Footprint for RCM3365/RCM3375
72 RabbitCore RCM3365/RCM3375