Reset Generator - Rabbit RCM3365 User Manual

D.1.3 Reset Generator
The RCM3365/RCM3375 uses a reset generator to reset the Rabbit 3000 microprocessor
when the voltage drops below the voltage necessary for reliable operation. The reset occurs
between 2.85 V and 3.00 V, typically 2.93 V.
The RCM3365/RCM3375 has a reset pin, pin 28 on header J4. This pin provides access to
the reset input of the reset generator, whose output drives the reset input of the Rabbit
3000 and peripheral circuits. The /RESET output from the reset generator is available on
pin 1 of header J4 on the RCM3365/RCM3375, and can be used to reset user-defined cir-
cuits on the motherboard on which the RCM3365/RCM3375 module is mounted.
User's Manual 135