Starting Dynamic C - Rabbit RCM3365 User Manual

2.3 Starting Dynamic C

Once the RCM3365/RCM3375 is connected as described in the preceding pages, start
Dynamic C by double-clicking on the Dynamic C icon on your desktop or in your
Start
menu. Select on the "Compiler" tab in the
Code and BIOS in Flash, Run in RAM
Dynamic C menu. Click .
Options > Project Options OK
Section 2.3.1 explains the remaining Dynamic C configurations to run a sample program
via the serial programming cable, and Section 2.3.2 explains the remaining Dynamic C
configurations to run a sample program via an Ethernet cable.
14 RabbitCore RCM3365/RCM3375