A.1.1 Headers
The RCM3305/RCM3315 uses headers at J3 and J4 for physical connection to other
boards. J3 and J4 are 2 × 17 SMT headers with a 2 mm pin spacing. J1, the programming
port, is a 2 × 5 header with a 1.27 mm pin spacing.
Figure A-3 shows the layout of another board for the RCM3305/RCM3315 to be plugged
into. These values are relative to the mounting hole.
RCM3300 Series
Footprint
Figure A-3. User Board Footprint for RCM3305/RCM3315
70
RabbitCore RCM3305/RCM3315