Headers - Rabbit RabbitCore User Manual

Table A-1. RabbitCore RCM3750 Specifications (continued)
Parameter
Connectors
Board Size
A.1.1 Headers
The RCM3750 uses one header at J1 for physical connection to other boards. J1 is a
2 × 20 SMT header with a 0.1" pin spacing.
Figure A-3 shows the layout of another board for the RCM3750 to be plugged into. These
values are relative to the designated fiducial (reference point).
J1
0.290
(7.4)
0.060
(1.5)
0.000
(0.0)
User's Manual
RCM3750 Footprint
Figure A-3. User Board Footprint for RCM3750
RCM3750
One 2 x 20, 0.1" pitch
1.20" × 2.95" × 0.89"
(30 mm × 75 mm × 23 mm)
0.263
(6.7)
79