Rabbitnet; Other Sample Programs - Rabbit RCM3365 User Manual

3.2.5 RabbitNet

Sample programs are available for each RabbitNet peripheral card, and can be found in the
Dynamic C folder. When you run any of these sample programs
SAMPLES\RabbitNet
in conjunction with the RCM3365/RCM3375 and the Prototyping Board, you need to add
the line
#use rcm33xx.lib
at the beginning of the sample program.
TIP: You need to add #use rcm33xx.lib at the beginning of any sample program
that is not in the Dynamic C SAMPLES\RCM3360 folder.

3.2.6 Other Sample Programs

Section 6.6 describes the TCP/IP sample programs, and Appendix C.7 provides sample
programs for the optional LCD/keypad module that can be installed on the Prototyping
Board.
26 RabbitCore RCM3365/RCM3375