Developing Programs Remotely With Dynamic C - Rabbit RCM3365 User Manual

C-programmable core module with nand flash mass storage and ethernet

Table of Contents

5.1.1 Developing Programs Remotely with Dynamic C

Dynamic C is an integrated development environment that allows you to edit, compile,

and debug your programs. Dynamic C has the ability to allow programming over the

Internet or local Ethernet. This is accomplished in one of three ways.

1. RCM3365 RabbitCore modules that are preloaded with Dynamic C RabbitSys firm-

ware can be used with Dynamic C RabbitSys to be accessed via an Ethernet connection

for remote application updates, and for remote monitoring and control. Dynamic C

RabbitSys requires Dynamic C version 9.30 or later, and allows the RCM3365. The

Dynamic C RabbitSys User's Manual provides complete information on RabbitSys.

2. Via the Rabbit RabbitLink, which allows a Rabbit-based target to have programs down-

loaded to it and debugged with the same ease as exists when the target is connected

directly to a PC.

3. Dynamic C provides sample programs to illustrate the use of a download manager, but

these sample programs are not intended for use with the NAND flash on the RCM3365

and RCM3375 RabbitCore modules. The

grams found in the Dynamic C

piled to the program flash memory (which is a parallel flash memory). Custom

applications based on these sample programs may use the NAND flash for data storage.

User's Manual

DLM_TCP.C

SAMPLES\DOWN_LOAD

and

sample pro-

DLP_TCP.C

folder, are intended to be com-

Table of Contents

Rcm3375