Client Program; Pc Requirements; Client Program Installation; Connecting To The Dvr - LG LE2116D Owner's Manual

CLIENT PROGRAM

Client Program is the network program of the LG
DVR. This manual is written based on LE3116D (16
channels).
The description pictures may differ from your OS
(Operating System) type. The pictures used in this
manual are based on Windows XP.
Note:
Do not use other applications with this client program.
This can cause memory shortage and client program
malfunction.

PC Requirements

x OS (Operating System): Windows 2000 or
above, DirectX 8.1 or above.
x CPU: Intel Pentium III or above, AMD Athlon with
800 MHz or above.
x RAM: 512 MB or above.
x Graphics Card: AGP VGA with 64 MB Video
RAM or above.
Recommended PC Requirements
• OS: Windows XP
• CPU: Intel Pentium IV
• RAM: 512 MB
• Graphics Card: AGP VGA with 128 MB Video
RAM

Client Program Installation

1. Insert the Client Program CD which will be started
automatically.
If the disc does not run automatically on your PC,
open the Client Program CD and install the pro-
gram manually.
2. Run the install file and install the programs to
your computer following the InstallShield Wizard
displayed.
3. After installation finished you will find the pro-
grams in the start menu of the computer.
Note:
The [LG Emergency Agent] and [LG Export viewer]
programs will be installed with the client program
installation.
48

Connecting to the DVR

Register the Site Name
You should register a site name to control DVR by
the Client Program.
1. Double-Click the [LG Network Client] icon to start
the Client Program. The [Network Client] menu is
displayed.
2. Select [Tools] > [Connection Infomation].
The connection list menu is displayed.
3. Select [Add] and the connection setup menu is
displayed.
4. Enter the site name, IP address and port.
- Site Name: Enter the description of the site.
- IP Address: Enter the IP Address or the Host
Name that you entered in the DDNS setup
menu of the DVR (See page 34).
- Port: Enter the TCP/IP port number of the
DVR. If it isn't entered, the port number is set
by default. (See page 33)
5. Select [OK].
6. Select [OK] to confirm the settings.
The registered site name is displayed.