Client Program; Pc Requirements; Client Program Installation - LG LDV-S503 Owner's Manual

Hide thumbs Also See for LDV-S503:
Table of Contents

Advertisement

CLIENT PROGRAM

Client Program is the network program of the LDV-
S504 and LDV-S503. This manual is written based
on LDV-S504 (16 channels).
The description pictures may differ from your OS
(Operating System) type. The pictures used in this
manual are based on Windows XP.
Note:
Do not use other applications with this client program.
This can cause memory shortage and client program
malfunction.

PC Requirements

x OS (Operating System): Windows 2000 or
above, DirectX 8.1 or above.
x CPU: Intel Pentium III or above, AMD Athlon with
800 MHz or above.
x RAM: 512 MB or above.
x Graphics Card: AGP VGA with 64 MB Video
RAM or above.
Recommended PC Requirements
• OS: Windows XP
• CPU: Intel Pentium IV
• RAM: 512 MB
• Graphics Card: AGP VGA with 128 MB Video
RAM

Client Program Installation

1. Insert the Client Program CD which will be started
automatically.
If the disc does not run automatically on your PC,
open the Client Program CD and install the pro-
gram manually.
2. Run the install file and install the programs to
your computer following the InstallShield Wizard
displayed.
3. After installation finished you will find the pro-
grams in the start menu of the computer.
Note:
The [Emergency Agent] and [Export viewer] programs
will be installed with the client program installation.
50
Connecting to the DVR
Register the Site Name
You should register a site name to control DVR by
the Client Program.
1. Double-Click the [LE3100 Network Client] icon
to start the Client Program. The [S500/LE3100
Network Client] menu is displayed.
2. Select [Tools] > [Connection Infomation].
The connection list menu is displayed.
3. Select [Add] and the connection setup menu is
displayed.
4. Enter the site name, IP address and port.
-
Site Name: Enter the description of the site.
-
IP Address: Enter the IP Address or URL of
the DVR.
-
Port: Enter the TCP/IP port number of the
DVR. If it isn't entered, the port number is set
by default. (See page 35)
5. Select [OK].
6. Select [OK] to confirm the settings.
The registered site name is displayed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ldv-s504

Table of Contents