Table of Contents
Advertisement
Emergency
Notification:
l
- ON: Notifies the emergency agent about unit
operating information according to your notifica-
tion settings.
- OFF: Notification function is not used.
IP Address/Port: Enter the IP/port number of the
l
emergency agent program using the virtual
keyboard. The factory default port for this func-
tion is 9002. However in some cases it is better
to change this port number for added flexibility or
security. If desired change the port number (1025 ~
65535). You can set up to 9 IP/port numbers.
System Settings
Date/Time
Date: Enter the current date.
l
Time: Enter the current time. (24 HR or 12 HR)
l
Date Format: Select the date display format.
l
Time Format: Select the time display format.
l
38
Time Zone: Select your Time Zone.
l
(For more details refer to Timezone table on page
72)
Daylight Saving: Set to ON to you use the daylight
l
saving function.
Daylight Saving Start: Select the Daylight Saving
l
start time.
Daylight Saving End: Select the Daylight Saving
l
end time.
NTP
NTP: Set to ON when using the NTP (Network
l
Time Protocol) server for time adjustment. If the
NTP is set to OFF, the time settings should be
entered manually and the [Server], [Private Time
Server], [Sync. Interval] and [NTP Test] options are
deactivated.
Server: For most cases select public. The DVR will
l
obtain the average time among 5 public servers
(time.nist.gov, time-a.nist.gov, time-b.nist.gov, ntp.
nasa.gov, clock.isc.org).
Private Time Server: Enter the private time
l
server's IP address or host name using the virtual
keyboard.
Sync. Interval: You can set synchronized intervals
l
with the NTP time server to 1 day, 1 hour, 1 month
and 1 week.
NTP Test: Select [NTP Test] to test the NTP serv-
l
er.
Advertisement
Table of Contents
