System Settings; Properties; Network - LG LE5008 Series Owner's Manual

System settings

Properties

• DVR Name: Enter the DVR name using up to 20 characters.
• Language: Select a language for the setup menu and
information display.
• Button Beep: Marks up to activate the button beep. The button
beep is activated when using the buttons.
• Video format: Selects the video format to NTSC or PAL according
to your video system format. If you change the video format, the
HDD is formatted with selected video format. After the HDD has
been formatted, the confirmation message is displayed. Select
[OK] and press ENTER. The system will reboot.
NOTE
All cameras must be disconnected before you change the
video format to prevent malfunction.
• Configuration Import: Import the DVRs configuration data from
the USB memory stick.
• Configuration Export: Export the configuration data from this
DVR to the USB memory stick.
• Factory Default: You can reset the DVR to its original factory
settings. Some options cannot be reset (date, time, daylight
saving, time zone and user password settings).

Network

• DHCP: Select this option when a DHCP server is installed on the
network to allow IP address assignment. With this setting, the IP
address is assigned automatically.
• IP Address: Enter the IP address.
• Subnet Mask: Enter the subnet mask address.
• Gateway: Enter the gateway address.
• Primary DNS: Enter the Primary domain name server that
translates the hostnames into IP address.
• Secondary DNS : Enter the Secondary DNS server address that
backups the Primary DNS.
• TCP/IP Port: Enter the TCP/IP Port number. You can watch the
live surveillance image over the network with the PC Client
program. The factory default port for transmission of video and
audio data is 9001. However in some cases it is better to change
this port number for added flexibility or security. You can edit
this port between 1 025 and 65 535.
• Web Server Port: Enter the Web Sever Port number. You can
watch the live surveillance image over the network with a web
browser. Typically the TCP port used by HTTP is 80. However in
some cases it is better to change this port number for added
flexibility or security. You can edit this port to 80 or between
1 025 and 65 535.
• Audio Port: Enter the Audio Port number. You can edit this port
between 1 025 and 65 535.
• Bandwidth Throttle: Enter the Bandwidth to adjust the data
traffic.
Installation 27
3