System Settings; Properties - LG LRH7160D Series Owner's Manual

Setting the Menu Using the Front Panel Buttons or
Remote Control Buttons
Remote
Front Panel
Control
SEARCH SETUP
LOG-IN VIEW CAM BACK
SEARCH SETUP
LOG-IN VIEW
SEARCH SETUP
LOG-IN VIEW CAM BACK
1. Press SETUP to display the setup menu.
2. Use w/s to select the desired menu item, then press OK to
display the submenu.
3. Use w/s to select the desired submenu item, then press OK
to display the setting options.
4. Use w/s to select the desired option then press OK to set the
value.
5. Use a/d to select the desired setting then press OK to confirm
your selection.
6. Press BACK repeatedly to exit the Setup menu.
If the save message appears, select [OK] and press OK to save
the settings.
NOTE
SEARCH SETUP
LOG-IN VIEW CAM BACK
• When you operate the function menu by using the remote
control and front panel buttons, both buttons are operated in
the same way to control the function menu.
• To use other functions of number buttons on the front panel,
SEARCH SETUP
LOG-IN VIEW CAM BACK
follow the below steps.
1. Press SHIFT. The button indicator turns red.
2. Select the function button you want.
• All the operation explanations are based on using the remote
control.
SEARCH SETUP
LOG-IN VIEW
Description
Use these buttons to select the
menu options or adjust the
options value.
REC
Select the option or confirm the
setting.
REC
Return to the previous menu or
CAM BACK
level.
REC
REC
REC
REC
CAM BACK

System settings

Properties

• System Name: Enter the System name by using alphabetic letter,
numeric digit and symbols up to 21 characters.
• Language: Select a language for the setup menu and
information display.
• Button Beep: Marks up to activate the button beep. The button
beep is activated when using the buttons.
• Video Format: Selects the video format to NTSC or PAL according
to your video system format. If you change the video format, the
HDD is formatted with selected video format. After the HDD has
been formatted, the confirmation message is displayed. Select
[OK] and press OK. The system will reboot.
NOTE
All cameras must be disconnected before you change the
video format to prevent malfunction.
• Resolution: Sets the output resolution of the HDMI video signal.
• Configuration Import: Import the DVRs configuration data from
the USB memory stick.
• Configuration Export: Export the configuration data from this
DVR to the USB memory stick.
• Factory Default: You can reset the DVR to its original factory
settings. Some options cannot be reset. (date, time, daylight
saving, time zone and user password settings)
• Convert (LRH7160, LRN8240): Press the button to switch
between model LRH7160 and LRN8240.
Installation 27
3