Enabling/Disabling Voice Prompts; Enabling/Disabling Sidetone - Sena SMH10 User Manual

2. Tap the Center Button, and you will hear a voice prompt saying "Speed dial one" and
"Phone connected".
3. Tap the (+) Button or the (-) Button to select one of three speed dial numbers and you
hear a voice prompt saying "Speed dial (#)".
4. Call a phone number you want to assign and you will hear a voice prompt saying "Save
speed dial (#)". The phone number is automatically assigned to the selected speed dial number.
Then the phone call will hang up before being connected.
5. To exit the menu, tap the (+) Button or the (-) Button until you hear a voice prompt saying
"Cancel", and tap the Center Button to confirm. You will then hear a voice prompt saying "Cancel". If
any button is not pressed within 1 minute, the Bluetooth Mic will exit the configuration menu and go
back to stand-by mode.
Note:
1. You can assign up to 3 phone numbers for speed dial.
2. You can assign phone numbers for speed dialing by using the Sena Device Manager software. For
more information, visit the Sena Bluetooth web site at www.sena.com.

4.6 Enabling/Disabling Voice Prompts

You can disable voice prompts by configuration setting, but the following voice prompts are always on.
- Voice prompts for configuration menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
- Voice prompts for speed dial

4.7 Enabling/Disabling Sidetone

"Voice prompt"
Enable
Tap the Center Button
"Sidetone"
Disable
| Bluetooth Mic & Intercom
Voice Prompt
Factory Default
Enable / Disable
Voice Prompt
Factory Default