Smh3 Configuration Setting; Enabling/Disabling Voice Activated Phone Answering; Enabling/Disabling Voice Prompts - Sena SMH3 User Manual

8. SMH3 CONFIGURATION SETTING

You can set the configuration of the SMH3 by the voice menu instruction as below.
1. To enter into voice configuration menu, press and hold the (+) Button for 10 seconds until the LED shows solid blue
and you hear high tone double beeps. You will hear a voice prompt saying "Configuration menu".
2. Tap the (+) Button to navigate between menus. You will hear voice prompts for each menu items as below.
3. You can enable or disable the feature or execute the command by tapping the (-) Button.
4. If any button is not pressed within 10 seconds, the SMH3 will exit the configuration and goes back to standby.
5. If you want to exit the configuration immediately, press the (+) Button until you hear a voice prompt, "Exit
configuration", and tap the (-) Button.
The voice prompt for each menu item is as below:
(1) VOX phone
(2) Voice prompt
(3) Delete all pairings
(4) Factory reset
(5) Exit configuration

8.1 Enabling/Disabling Voice Activated Phone Answering

Voice Prompt
"VOX phone"
Factory Default Enable
Enable / Disable Tap the (-) Button
If this feature is enabled, you can answer incoming calls by simply saying a word loudly enough, unless you are
connected to intercom. For example, when you hear a series of beeps for an incoming call, you can answer the phone by
saying "Hello" or any other word loudly. However, the phone VOX feature does not work if you are connected to intercom.
This is enabled from the factory but you can disable this. If this mode is disabled, you have to tap the (+) Button to answer
an incoming call.

8.2 Enabling/Disabling Voice Prompts

[picture 10-1]
13
SMH3
|